Use stored water and rain water to supply drip irrigation systems as well as conventional hose guns and sprinklers with this self-priming garden pump. A great way to be more water efficient by using rainwater to irrigate the plants in your garden or for washing your car.
With a high pressure of 4bar this pump provides a higher pressure than the average UK tap pressure, although actual performance does depend on the length and diameter of the watering hose that you use.
The XAJE80P intelligent pump responds to pressure in the delivery pipe. It turns itself on when there is a demand for water, then switches off again automatically once the demand has been met. This pumps is sometimes sold in the UK and Europe as an XAJE80G (the only difference being the red colour of the polypropylene electrical covers/ends of the "G").
This automatic pump comes, as standard, with anti-blocking system and dry run protection with automatic restart. It also comes with a Non-return Valve (NRV) that you screw into the water inlet.
It is very quiet in use. Their extremely low noise and vibration levels are due to the use of larger, smoother running motor components, a single piece rotor shaft, and a 360 degree water jacket surrounding the motor. Noise Absorption is maximised, making them far more pleasant to live with than a traditional air-cooled pump. This water cooled design and stainless steel stator housing remove heat from the motor faster than any other type of design. Unlike air and oil cooled pumps, which warm up quickly in hot rooms and sunny positions, increasing susceptibility to stress and fatigue, SteelPumps stay as cool as the water they are pumping.
This is a clean water pump which means that collected rainwater needs to be filtered before it enters the pump. This can either be done when collecting the water using a quality downpipe diverter that also filters the water, like the 3P Filter Collector Universal, before it enters your rainwater storage vessel.
- Pumped liquid: Clean cold water without abrasives or solids.
- Motor: 0.8hp.
- Max bar: 4
- Inlet Size: 1"
- Outlet Size: 1.25"
- Dimensions: 447mm long x 200mm wide x 226mm high
- Weight: 11.5Kg
- Waterproof protection rating: IP68
- Pump Type: Water cooled, single stage impeller/diffuser with venturi.
- Motor Body: Stainless 304.
- Rotor Shaft: Stainless 420.
- Supporting Flanges: Polypropylene.
- Impeller, Diffuser and Venturi: Noryl.
- Electrical cover: Polypropylene.
- Liquid temperature range: +2°C to +37°C.
- Air temperature: max +45°C.
- Maximum depth: 5m.
- Calibrating pressure rate switch: 1.5 bar.
- Cable Length: 10m with plug.
Pump Body – Polypropylene
Motor Body – Stainless 304
Rotor Shaft – Stainless 420
Supporting Flanges – Polypropylene
Impeller, Diffuser and Venturi – Noryl
Electrical cover – Polypropylene.
Mechanical Seal – Silicon Carbide
Other Seals – NBR70
The delivery information page is divided into 1. Specific and 2. General delivery information below.1. Specific Delivery Information relating to product lines
- Small items dispatched daily with RM24 ~85% arriving next day
- Large items (UK made) typically 5 - 15 working days (Parcelforce/Tuffnells etc.)
- Prestige Grit Bins
- Prestige Square planters (Please get in touch)
- 180l Washed Terracotta Planter
- Cascata Water butt
- Agua Water butt
- Grey Fountain Bowl
- 100l Manhattan Black, Grey, White
- All Ecosoft Items (Please email to confirm stock)
- Noblesse - Charcoal
- 3P Large Water butt - Water Pillar - 800l with quality filter and tap
- 200l slim wall hung water butt
- Column 500L - Green
The following items (EU) are purchased on a pre order basis with a potential 12 week lead time:
- Design (circular and modern) water butt stands
- 700 Litre D Shape Water Tank
We're a Manchester based company and ship to the UK at our standard rates. Please get in touch if you are based in the Highlands, UK island or Northern Ireland, surcharges may apply.
We no longer support ordering from the EU and NI through the website. We can support ad hoc orders with limited liability.
Our design and Prestige range is available in the Netherlands, Ireland, Belgium, France, Germany, direct or through our distributors.
Stock items will be dispatched on the day of order, if ordered before 1pm.
Letters are sent 1st class.
Parcels <2kg are shipped with Royal Mail 24 Tracked with the following target delivery times.
A loss/replacement can only be pursued in line with the target delivery times of the courier or once the courier accept loss.
Bulky items (and pallet deliveries) are dispatched within 2-5 working days. We will request a contact number if this has not been provided at checkout.
Some items are made to order (bespoke) and details are given on the listing for dispatch times. If for any reason we anticipate a delay on our normal dispatch time we will contact you to let you know.
Occasionally there are delays. We shall not be liable for any direct or indirect losses, costs, damages or expenses incurred by you or any other person for any delays in delivery.
Missed deliveries where attempted delivery has been made usually result in re-deliveries the following day. The customer is responsible for organising re deliveries by contacting the courier direct.
Parcels/deliveries can only be "left out" if the delivering company allows that option. Parcelforce, for example, do not allow a parcel to be "left out".
We are an environment centric business and as such we try to minimise our waste. Our packaging is usually recycled and/or recyclable and we make efficient use of packaging to minimise wastage.
Covid delivery updates between 12.3.20 and 11.1.21 21 have been archived here.