Innovative water solutions which save money and the environment

15+ years' industry knowledge

We’re experts in our field

Fast Delivery

Same day dispatch on many items

Helping the environment

With sustainable solutions

{"id":6906373046359,"title":"Divertron 900X with Float Switch","handle":"divertron-900x-with-float-switch","description":"\u003cp data-mce-fragment=\"1\"\u003eA high quality multi-stage DAB submersible pump, the Divertron 900x (also referred to as Leader Divertron 900x) is equipped with 4 impellers and electronic flow control which automatically stops and starts the pump as needed. Automation is controlled by an increase or decrease in pressure in the system, for example, when a tap  is turned on causing the water pressure to drop, the pump automatically turns on. When the tap is turned off again and the pressure resumes, the pump automatically turns off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 900x is designed for pumping clean water only. Any abrasives\/solids present in the water will damage the impeller and the internal non return valve (NRV) so, when pumping rainwater or similar, it's highly recommended to use a pre-tank filter to help prevent this.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eManufactured from anti-corrosive and rust-proof materials and with a wear resistant shaft, the 900x is totally waterproof and suitable for use both indoors and out.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt's cooled by the water around it, making it a quiet pump when operating but because of this, the 900x must always be fully submerged when in use, to prevent it from overheating. This model is supplied with an integrated\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong\u003eFloat Switch\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eto stop the pump automatically, whenever the surrounding water level drops below the minimum required for sufficient cooling. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs with all the Divertron models, the 1200x should never sit directly on the base of the tank unless a\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFloating Intake\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eis fitted. This should be kept within 15° of vertical to prevent any sediment from entering the pump. Where a floating intake is not possible or desired, an alternative is to attach a mesh strainer to the pump inlet and suspend the pump at least 20cm above the base of the tank with a suitable lifting cable (not supplied).   \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA\u003cspan data-mce-fragment=\"1\"\u003e pressure vessel \u003c\/span\u003eis highly recommended with these pumps. Fitted to the water delivery pipework (i.e. after the pump) pressure vessels act as a buffer which reduces unnecessary stop\/start activity on the pump caused by leaks. This improves the energy efficiency of the pump and ultimately helps increase its lifespan. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDomestic water boosting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRainwater harvesting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSurface irrigation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTank transfer \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAbove ground tanks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGarden water butt and larger types\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSubmersed surface and underground installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDivertron 900 x\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePumped liquid: Clean cold water without abrasives or solids.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax flow: 105l\/min (6.3m\u003csup data-mce-fragment=\"1\"\u003e3\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eper hour).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax Head: 45m\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInlet Size: 1\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutlet Size: 1\" (supplied as standard with a multi-hosetail reducer)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions: 160mm deep x 160mm wide x 536mm high (not including multi-hosetail connector)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 11Kg\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWaterproof protection rating: IP68\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLiquid temperature range: +0°C to +40°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum depth: 12m (39ft).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCable Length: 15m H07RNF with 2-pin (Schuko) plug.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCE Mark\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease note:\u003c\/strong\u003e All Divertrons are fitted with a 2-pin (Schuko) plug. We strongly recommend that all submersible pumps are installed on a 10A single fused spur and should be installed by a qualified electrician. If you need an automatic pump with a 3-pin plug, please look at the SteelPump range.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e Float Switch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCable Material: H07RN-F 3X1\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCable Length: 2m (contact us for other lengths)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eModel Type: K04-10\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproval: ENEC \/ EC\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMicroswitch Features: 10(4)A 250V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating Temperature: 0\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003eC to 50\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003eC\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProtection Rating: IP68\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSwitch Angles: +45\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003e\/-45\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFloat Dimensions: 81 x 131 x 41.5mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFloat Weight: 154g\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFloat Volume: 244cm\u003csup data-mce-fragment=\"1\"\u003e3\u003c\/sup\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax Depth: 1 bar\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFloat Housing Material: Non-toxic polypropylene (PP), Colouring: Non-toxic, Blue and Yellow or Blue and Red\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003e3-Way Cable Joiner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCable Entries: 2\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNumber of Poles: 3\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTerminal Type: Screw - end barrier contact\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBody Material: PA66\/TPE\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIP Rating: IP68\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax Conductor Size: 4mm\u003csup data-mce-fragment=\"1\"\u003e2\u003c\/sup\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax Current: 32A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax Voltage: 450\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemp Rating: -40\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003eC to 125\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003eC\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMinimum Cable Diameter: 5mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum Cable Diameter: 13mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemperature \"T\" Rating: T85\u003c\/li\u003e\n\u003c\/ul\u003e","published_at":"2023-11-23T16:22:59+00:00","created_at":"2023-09-07T15:48:29+01:00","vendor":"3P","type":"Pumps","tags":[],"price":56900,"price_min":56900,"price_max":56900,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":40242779717719,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"IR10136F","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Divertron 900X with Float Switch","public_title":null,"options":["Default Title"],"price":56900,"weight":11000,"compare_at_price":null,"inventory_quantity":0,"inventory_management":null,"inventory_policy":"deny","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_X_900_with_Key_Float__61294.jpg?v=1694098266","\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_X_900_pump_with_Key_Float_Switch_annotated__94393.jpg?v=1694098266","\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_X_900_3_way_cable_joiner_close_up__13046.jpg?v=1694098266","\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_Divertron_New_Model_Flow_Curves__67227_2f187ace-ed42-4956-a3cf-cf21cfd9d24d.jpg?v=1694098266"],"featured_image":"\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_X_900_with_Key_Float__61294.jpg?v=1694098266","options":["Title"],"media":[{"alt":null,"id":23098196918359,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_X_900_with_Key_Float__61294.jpg?v=1694098266"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_X_900_with_Key_Float__61294.jpg?v=1694098266","width":1280},{"alt":null,"id":23098196885591,"position":2,"preview_image":{"aspect_ratio":1.0,"height":900,"width":900,"src":"\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_X_900_pump_with_Key_Float_Switch_annotated__94393.jpg?v=1694098266"},"aspect_ratio":1.0,"height":900,"media_type":"image","src":"\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_X_900_pump_with_Key_Float_Switch_annotated__94393.jpg?v=1694098266","width":900},{"alt":null,"id":23098196852823,"position":3,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_X_900_3_way_cable_joiner_close_up__13046.jpg?v=1694098266"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_X_900_3_way_cable_joiner_close_up__13046.jpg?v=1694098266","width":1280},{"alt":null,"id":23098196820055,"position":4,"preview_image":{"aspect_ratio":1.0,"height":1280,"width":1280,"src":"\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_Divertron_New_Model_Flow_Curves__67227_2f187ace-ed42-4956-a3cf-cf21cfd9d24d.jpg?v=1694098266"},"aspect_ratio":1.0,"height":1280,"media_type":"image","src":"\/\/www.freeflush.co.uk\/cdn\/shop\/files\/DAB_Divertron_New_Model_Flow_Curves__67227_2f187ace-ed42-4956-a3cf-cf21cfd9d24d.jpg?v=1694098266","width":1280}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp data-mce-fragment=\"1\"\u003eA high quality multi-stage DAB submersible pump, the Divertron 900x (also referred to as Leader Divertron 900x) is equipped with 4 impellers and electronic flow control which automatically stops and starts the pump as needed. Automation is controlled by an increase or decrease in pressure in the system, for example, when a tap  is turned on causing the water pressure to drop, the pump automatically turns on. When the tap is turned off again and the pressure resumes, the pump automatically turns off.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 900x is designed for pumping clean water only. Any abrasives\/solids present in the water will damage the impeller and the internal non return valve (NRV) so, when pumping rainwater or similar, it's highly recommended to use a pre-tank filter to help prevent this.  \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eManufactured from anti-corrosive and rust-proof materials and with a wear resistant shaft, the 900x is totally waterproof and suitable for use both indoors and out.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eIt's cooled by the water around it, making it a quiet pump when operating but because of this, the 900x must always be fully submerged when in use, to prevent it from overheating. This model is supplied with an integrated\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong\u003eFloat Switch\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eto stop the pump automatically, whenever the surrounding water level drops below the minimum required for sufficient cooling. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs with all the Divertron models, the 1200x should never sit directly on the base of the tank unless a\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFloating Intake\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eis fitted. This should be kept within 15° of vertical to prevent any sediment from entering the pump. Where a floating intake is not possible or desired, an alternative is to attach a mesh strainer to the pump inlet and suspend the pump at least 20cm above the base of the tank with a suitable lifting cable (not supplied).   \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eA\u003cspan data-mce-fragment=\"1\"\u003e pressure vessel \u003c\/span\u003eis highly recommended with these pumps. Fitted to the water delivery pipework (i.e. after the pump) pressure vessels act as a buffer which reduces unnecessary stop\/start activity on the pump caused by leaks. This improves the energy efficiency of the pump and ultimately helps increase its lifespan. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eRecommended Uses\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDomestic water boosting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRainwater harvesting\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSurface irrigation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTank transfer \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAbove ground tanks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eGarden water butt and larger types\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSubmersed surface and underground installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eDivertron 900 x\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePumped liquid: Clean cold water without abrasives or solids.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax flow: 105l\/min (6.3m\u003csup data-mce-fragment=\"1\"\u003e3\u003c\/sup\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eper hour).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax Head: 45m\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eInlet Size: 1\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOutlet Size: 1\" (supplied as standard with a multi-hosetail reducer)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDimensions: 160mm deep x 160mm wide x 536mm high (not including multi-hosetail connector)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWeight: 11Kg\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWaterproof protection rating: IP68\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLiquid temperature range: +0°C to +40°C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum depth: 12m (39ft).\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCable Length: 15m H07RNF with 2-pin (Schuko) plug.\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCE Mark\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease note:\u003c\/strong\u003e All Divertrons are fitted with a 2-pin (Schuko) plug. We strongly recommend that all submersible pumps are installed on a 10A single fused spur and should be installed by a qualified electrician. If you need an automatic pump with a 3-pin plug, please look at the SteelPump range.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e Float Switch\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCable Material: H07RN-F 3X1\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCable Length: 2m (contact us for other lengths)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eModel Type: K04-10\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eApproval: ENEC \/ EC\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMicroswitch Features: 10(4)A 250V\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOperating Temperature: 0\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003eC to 50\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003eC\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProtection Rating: IP68\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSwitch Angles: +45\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003e\/-45\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFloat Dimensions: 81 x 131 x 41.5mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFloat Weight: 154g\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFloat Volume: 244cm\u003csup data-mce-fragment=\"1\"\u003e3\u003c\/sup\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax Depth: 1 bar\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFloat Housing Material: Non-toxic polypropylene (PP), Colouring: Non-toxic, Blue and Yellow or Blue and Red\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003e3-Way Cable Joiner\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCable Entries: 2\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNumber of Poles: 3\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTerminal Type: Screw - end barrier contact\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBody Material: PA66\/TPE\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIP Rating: IP68\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax Conductor Size: 4mm\u003csup data-mce-fragment=\"1\"\u003e2\u003c\/sup\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax Current: 32A\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMax Voltage: 450\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemp Rating: -40\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003eC to 125\u003csup data-mce-fragment=\"1\"\u003eo\u003c\/sup\u003eC\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMinimum Cable Diameter: 5mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximum Cable Diameter: 13mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemperature \"T\" Rating: T85\u003c\/li\u003e\n\u003c\/ul\u003e"}

Divertron 900X with Float Switch

£569.00
Maximum quantity available reached.

A high quality multi-stage DAB submersible pump, the Divertron 900x (also referred to as Leader Divertron 900x) is equipped with 4 impellers and electronic flow control which automatically stops and starts the pump as needed. Automation is controlled by an increase or decrease in pressure in the system, for example, when a tap  is turned on causing the water pressure to drop, the pump automatically turns on. When the tap is turned off again and the pressure resumes, the pump automatically turns off.

The 900x is designed for pumping clean water only. Any abrasives/solids present in the water will damage the impeller and the internal non return valve (NRV) so, when pumping rainwater or similar, it's highly recommended to use a pre-tank filter to help prevent this.  

Manufactured from anti-corrosive and rust-proof materials and with a wear resistant shaft, the 900x is totally waterproof and suitable for use both indoors and out.

It's cooled by the water around it, making it a quiet pump when operating but because of this, the 900x must always be fully submerged when in use, to prevent it from overheating. This model is supplied with an integrated Float Switch to stop the pump automatically, whenever the surrounding water level drops below the minimum required for sufficient cooling. 

As with all the Divertron models, the 1200x should never sit directly on the base of the tank unless a Floating Intake is fitted. This should be kept within 15° of vertical to prevent any sediment from entering the pump. Where a floating intake is not possible or desired, an alternative is to attach a mesh strainer to the pump inlet and suspend the pump at least 20cm above the base of the tank with a suitable lifting cable (not supplied).   

A pressure vessel is highly recommended with these pumps. Fitted to the water delivery pipework (i.e. after the pump) pressure vessels act as a buffer which reduces unnecessary stop/start activity on the pump caused by leaks. This improves the energy efficiency of the pump and ultimately helps increase its lifespan. 

Recommended Uses

  • Domestic water boosting
  • Rainwater harvesting
  • Surface irrigation
  • Tank transfer 
  • Above ground tanks
  • Garden water butt and larger types
  • Submersed surface and underground installation.

Technical Information

Divertron 900 x

  • Pumped liquid: Clean cold water without abrasives or solids.
  • Max flow: 105l/min (6.3m3 per hour).
  • Max Head: 45m
  • Inlet Size: 1"
  • Outlet Size: 1" (supplied as standard with a multi-hosetail reducer)
  • Dimensions: 160mm deep x 160mm wide x 536mm high (not including multi-hosetail connector)
  • Weight: 11Kg
  • Waterproof protection rating: IP68
  • Liquid temperature range: +0°C to +40°C
  • Maximum depth: 12m (39ft).
  • Cable Length: 15m H07RNF with 2-pin (Schuko) plug.
  • CE Mark

Please note: All Divertrons are fitted with a 2-pin (Schuko) plug. We strongly recommend that all submersible pumps are installed on a 10A single fused spur and should be installed by a qualified electrician. If you need an automatic pump with a 3-pin plug, please look at the SteelPump range.

 Float Switch

  • Cable Material: H07RN-F 3X1
  • Cable Length: 2m (contact us for other lengths)
  • Model Type: K04-10
  • Approval: ENEC / EC
  • Microswitch Features: 10(4)A 250V
  • Operating Temperature: 0oC to 50oC
  • Protection Rating: IP68
  • Switch Angles: +45o/-45o
  • Float Dimensions: 81 x 131 x 41.5mm
  • Float Weight: 154g
  • Float Volume: 244cm3
  • Max Depth: 1 bar
  • Float Housing Material: Non-toxic polypropylene (PP), Colouring: Non-toxic, Blue and Yellow or Blue and Red

 3-Way Cable Joiner

  • Cable Entries: 2
  • Number of Poles: 3
  • Terminal Type: Screw - end barrier contact
  • Body Material: PA66/TPE
  • IP Rating: IP68
  • Max Conductor Size: 4mm2
  • Max Current: 32A
  • Max Voltage: 450
  • Temp Rating: -40oC to 125oC
  • Minimum Cable Diameter: 5mm
  • Maximum Cable Diameter: 13mm
  • Temperature "T" Rating: T85
There is no additional documentation for this product

 

If your query is related to an existing order please email in with your order number in the subject line. If you have a new residential enquiry please consult the online guides before calling as they may answer your question.

The delivery information page is divided into 1. Specific and 2. General delivery information below. 

1. Specific Delivery Information relating to product lines
  • Small items dispatched daily with RM24 ~85% arriving next day
  • Large items (UK made) typically 5 - 15 working days (Parcelforce/APC etc) 
The following items have a 2-4 week lead time:
    • 1,000 litre compact underground rainwater tank
    • 250 litre Prestige large Plant Pot style planter Grey
    • SAR40-TOP2 Wastewater Lifting station
    • 250 litre Classic Slim Wall Water butt - Black Granite, Grey
    The following items (EU) are purchased on a pre order basis with a potential 4-8 weeks lead time:
    • Hydraloop
    • Green Roof sedum tray - pre planted option
    • Madison 185 Litre rain barrel - Millstone
    The following items (EU) are purchased on a pre order basis with a potential 10-12 week lead time:
      2. General Delivery information

       

      We're a Manchester based company and ship to the UK at our standard rates. Please get in touch requesting the delivery surcharge value  if you are based in the Highlands or a UK island

      We no longer support ordering from the EU and Northern Ireland through the website. We can support ad hoc orders with limited liability.

      Our design and Prestige range is available in the Netherlands, Ireland, Belgium, France, Germany, through our distributors.

      Stock items will be dispatched on the day of order, if ordered before 1pm.

      Letters are sent 1st class. 

      Parcels <2kg are shipped with Royal Mail 24 Tracked with the following target delivery times.

      Guaranteed delivery can be arranged by advance agreement. This agreement is back to back with the courier and we will not be liable for any delays as per our terms.

      A loss/replacement can only be pursued in line with the target delivery times of the courier or once the courier accept loss. 

      Bulky items (and pallet deliveries) are dispatched within 2-15 working days. We will request a contact number if this has not been provided at checkout. 

      Some items are made to order (bespoke) and details are given on the listing for dispatch times.  If for any reason we anticipate a delay on our normal dispatch time we will contact you to let you know.

      Occasionally there are delays. We shall not be liable for any direct or indirect losses, costs, damages or expenses incurred by you or any other person for any delays in delivery.

      Missed deliveries where attempted delivery has been made usually result in re-deliveries the following day. The customer is responsible for organising re deliveries by contacting the courier direct

      Parcels/deliveries can only be "left out" if the delivering company allows that option. Parcelforce, for example, do not allow a parcel to be "left out". 

      We are an environment centric business and as such we try to minimise our waste. Our packaging is usually recycled and/or recyclable and we make efficient use of packaging to minimise wastage.

      Covid delivery updates between 12.3.20 and 11.1.21 21 have been archived here.

      Customer Reviews

      Be the first to write a review
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)
      0%
      (0)